Rack Specifications; Overview Of Racks; General Requirements For Cabinets And Racks - Cisco Nexus 93360YC-FX2 Hardware Installation Manual

Rack Specifications

•
•
•
•
•

Overview of Racks

You can install the switch in the following types of cabinets and racks, assuming an external ambient air
temperature range of 0 to 104°F (0 to 40°C):
• Standard perforated cabinets
• Solid-walled cabinets with a roof fan tray (bottom to top cooling)
• Standard open racks
Note
If you are selecting an enclosed cabinet, we recommend one of the thermally validated types, either standard
perforated or solid-walled with a fan tray.
Note
We do not recommend that you use racks that have obstructions (such as power strips), because the obstructions
could impair access to field-replaceable units (FRUs).

General Requirements for Cabinets and Racks

The cabinet or rack must also meet the following requirements:
• Standard 19-inch (48.3 cm) (two- or four-post EIA cabinet or rack, with mounting rails that conform to
Overview of Racks, on page 51
General Requirements for Cabinets and Racks, on page 51
Requirements Specific to Standard Open Racks, on page 52
Requirements Specific to Perforated Cabinets, on page 52
Cable Management Guidelines, on page 52
English universal hole spacing per section 1 of ANSI/EIA-310-D-1992). For more information, see
Requirements Specific to Perforated Cabinets, on page
Cisco Nexus 93360YC-FX2 NX-OS Mode Switch Hardware Installation Guide
A
A P P E N D I X
52.
51