EUFAB 16615 Operating Instructions Manual page 8

Intelligent battery charger 6/12 v 4 a
Hide thumbs Also See for 16615:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7
3. Specifications
Dimensions:
180 x 80 x 45 mm
Weight:
0.465 kg
Long mains cable: 1.50 m
Long charger cable: 1.50 m
Input:
220-240 V AC, 50/60 Hz
Output:
6 V mode: 6 V DC, 2.0 A
Motorbike: 12 V DC, 2.0 A
Car:
4. Explanation of symbols
Corresponds to EC
directives
Insulated housing
(protection class II).
Read the operating
instructions
5. Safety notes
The warning triangle labels all instructions important to safety. Always follow these otherwise you could injure
yourself or damage the device.
Children must not play with the appliance.
Cleaning and user-maintenance must not be carried out by children unless they are supervised.
Only connect the device to a correctly installed socket. The voltage must correspond to the specification on the
type plate of the device.
Do not trap the power cable and protect it from sharp edges, damp, heat or oil. The power cable of the unit cannot
be replaced. In the event that the cable is damaged, the unit must be disposed of.
Do not operate the device or immediately pull the plug if it is damaged or you suspect it may be defective. In this
case, contact our technicians.
Pull the plug when the device is not in use.Keep packaging materials, especially plastic and plastic bags, away from
children. Risk of suffocation!
Remove all plastic from the device before use.
Lay the mains cable in such a way that you are not hindered by it, and no one is able to accidentally pull it.
Disconnect the battery charger from the power supply after charging.
Keep the charger in a place that cannot be accessed by children or unauthorised persons.
Never operate the device in the vicinity of flammable materials or in an environment prone to explosion.
Always wear suitable working clothes, protective gloves and goggles. Battery acid is corrosive! Immediately and
thoroughly wash off any splashed acid and consult a doctor if necessary. If battery acid gets into the eyes, immedi-
ately rinse under running water for at least 10 minutes and consult a doctor.
Do not cover the charger, this may lead to overheating and result in damages. Never set the charger up for operati-
on on a surface that is insulating (e.g. polystyrene). There is a risk of heat build up!
If you wish to charge a vehicle battery in the installed state, first park the vehicle safely, put on the parking brake
and switch off the ignition. Cut the battery (positive terminal) off from the on-board network of your vehicle. To do
this, consult the manual for your vehicle, or ask your specialist workshop.
8
12 V DC, 4.0 A
Labelled electrical
product may not be
disposed of in the
household waste
Fuse,
here: Slow-burning,
1.6A
Corresponds to the
requirements of § 21
of the German
Product Safety Law
(Produktsicherheitsg
esetz)
Battery capacity:
Protection class:
Ambient temperature: -5 °C to +40 °C
IP65
6 V min 1.2 Ah, max. 14 Ah
12 V min 1.2 Ah, max. 120 Ah
IP65 (only device housing,
not connection and
charging cable)
Devices with this
symbol may only be
operated in the
house (dry
environment)
Recommended
battery capacity
Protection class
Spray water
protected

Advertisement

Table of Contents
loading

Table of Contents