English - Festo CPV GE-IB-8 Series Manual

1 User
The CPV valve terminal with field bus direct connection
(CPV Direct) is intended exclusively for use as a slave on
the field bus Interbus.
The maximum values specified in the section Technical
specifications" must be observed here. Detailed informa
tion can be found in the manual P.BE−CP−IB−.. .
Warning
S Switch off the power supply before connecting or
disconnecting plugs (otherwise this could lead to
functional damage).
S Use power supplies which guarantee reliable electri
cal isolation of the operating voltage as per IEC/DIN
EN 60204−1. Consider also the general requirements
for PELV circuits in accordance with IEC/DIN EN
60204−1.
S Connect an earth conductor of sufficient cross−
sectional area to the terminal marked with the earth
symbol.
Please note
Commission only a CP system which has been fitted and
wired completely.
Festo CPV..−GE−IB−8 0503a English
instructionsEnglish
13