Converter Tp-11 Receives Packets Of The Following Types; Query Of Readings Log; Output On Command; Output Off Command - Vega Absolute TP-11 User Manual

Vega TP-11 / User Manual

CONVERTER TP-11 RECEIVES PACKETS OF THE FOLLOWING TYPES

1. Query of readings log

Send by application on LoRaWAN port 2.
Size in bytes Field description
1 byte Packet type, this packet == 2
Upon receiving this package, the converter will perform an extraordinary polling of
connected sensor and send packet with current state.

2. Output ON command

Send by application on LoRaWAN port 2.
Size in bytes Field description
1 byte Packet type, this packet == 3
1 byte Output no. (1 - 2)
1 byte Output ON for the time in seconds (1...255), (0 – forever
ON).
Upon receiving this package TP-11 will close the correspond output and transmits the
packet with current readings.

3. Output OFF command

Send by application on LoRaWAN port 2.
Size in bytes Field description
1 byte Packet type, this packet == 5
1 byte Output no. (1 - 2)
Upon receiving this package TP-11 will unclose the correspond output and transmits
the packet with current readings.

4. Real-time clock adjustment

Send by application on LoRaWAN port 4.
Size in bytes Field description
1 byte Packet type, this packet == 255
8 bytes The value in seconds for which you need to adjust the
time.
Can be positive or negative
Revision 12 of 12 October 2021
Data type
uint8
Data type
uint8
uint8
uint8
Data type
uint8
uint8
Data type
uint8
int64
19