Safety Information; Observing The Five Safety Rules; Safety And Application Instructions - Siemens H-compact PLUS Operating Instructions Manual

Safety information

2.1

Observing the five safety rules

For your personal safety and to prevent material damage when working on the device,
always observe the safety instructions on the product and the following five safety rules: You
must read the information provided in "Safety information".
The five safety rules:
1. isolate,
2. Protect against reconnection,
3. verify that the equipment is not live,
4. Ground and short circuit,
5. Cover or enclose adjacent components that are still live
Qualified personnel
Commissioning and operation of this machine are to be carried out by qualified personnel
only. For the purpose of the safety information in this Instruction Manual, a "qualified person"
is someone who is authorized to energize, ground, and tag equipment, systems, and circuits
in accordance with established safety procedures.
2.2

Safety and application instructions

The safe use of electrical machines
tating or live parts
Rotating or live parts are dangerous.
Fatal or severe injuries and substantial material damage can occur if the required covers
are removed or if the machines are not handled, operated, or maintained properly.
Only remove covers in accordance with regulations and operate machines correctly.
Perform regular maintenance on the machine.
Qualified personnel
These operating instructions only contain the information that is necessary for the machines
to be used by qualified personnel in accordance with their intended purpose.
WOGeneric TEAAC / 2008
Siemens AG Operating Instructions 1.03 1RQ671...-Z
WARNING Ro-
2
9