Maintenance; Maintenance And Servicing; Safety Information - Siemens H-compact PLUS Operating Instructions Manual

Three-phase asynchronous motor
Table of Contents

Advertisement

Maintenance

9.1

Maintenance and servicing

9.1.1

Safety information

Risk of electric shock from touching live parts
Electrical parts conduct hazardous voltages. Touching these parts will result in an electric
shock,
which in turn causes death or serious injury.
Before starting work on the machines, make sure that the plant or system has been
disconnected in a manner that is compliant with the appropriate specifications and
regulations. In addition to the main currents, make sure that supplementary and auxiliary
circuits, particularly in heating devices, are also disconnected.
Risk of burns
Certain parts of the machine may reach temperatures above 100 °C. Touching them can
result in burns.
Check the temperature of the parts before touching them and take appropriate protective
measures if necessary.
Personal protective gear when using chemical cleaning agents
Chemical cleaning agents can be caustic or give off dangerous fumes.
Contact with skin or breathing in fumes can cause injuries such as chemical burns on the
skin or airways, or skin irritation.
During cleaning, make sure that appropriate methods of extracting fumes are in place and
that personal protective gear such as gloves, goggles, face masks or similar are worn.
If you use chemical cleaning agents, observe the instructions and any warnings given in the
relevant safety data sheet. The chemical cleaning agents used must be compatible with the
machine's components, particularly where plastic components are concerned.
WOGeneric TEAAC / 2008
Siemens AG Operating Instructions 1.03 1RQ671...-Z
DANGER
WARNING
CAUTION
9
45

Advertisement

Table of Contents
loading

Table of Contents