Philips ClearTouch GC536 User Manual page 29

EN
Problem
The appliance
produces no steam
or irregular steam.
Water droplets drip
from the steamer
head or the
appliance produces a
croaking sound.
An excessive
amount of water
drips out of the
steamer head when
the appliance is
heating up.
Water leaks out
from the steamer
base.
A few water
droplets come out
when the water tank
is detached.
Possible cause
The steamer has not heated
up sufficiently.
Steam has condensed in the
hose.
The water level is below the
MIN level indication or the
tank is not inserted properly.
Too much scale has built up
in the appliance.
You have left the steamer
head and/or the steam
supply hose in horizontal
position for a long time.
When the hose forms a
U-shape, condensation in
the hose cannot flow back
into the water tank.
The water in the appliance is
dirty or has been left inside
the appliance for a long
time.
You have not closed the
water tank cap or easy rinse
knob securely.
The water tank is not
inserted properly.
This is part of the water
inlet design.
Solution
Let the appliance heat up for
approximately 45 seconds.
Use for faster heat up
(GC536 only).
Lift the steamer head to
straighten the hose vertically.
This allows any condensation
to flow back.
Refill the water tank and insert
it properly until you hear a
"click" sound.
Perform easy rinse process.
Refer to section.
Lift the steamer head to
straighten the hose vertically.
This allows any condensation
to flow back.
Lift the steamer head to
straighten the hose vertically.
This allows any condensation
to flow back.
Perform easy rinse process.
Refer to section.
Close the water tank cap and
easy rinse knob securely.
Insert the tank properly until
you hear a "click" sound.
This is normal.
29