Setting The Ibm 7858 Modem Connected To Mpa Card (Syn); Setting The 7858 Modem Connected To Com1 (Asyn); Setting The 7858 Modem Connected To Mpacard On Com2 (Asyn) - IBM 3745 Console Setup Manual

4. Press the t key to select a digit. Press the
~
key to move to the next position
0 , ' : , . . '
I
(~
key can be used for backspacing).
5. Press Enter twice to save the target service processor's phone number.
Setting the IBM 7858 Modem Connected to MPA Card (SYN)
1. Press the
~
key until the
I
CONFIG
I
message displays at the top of the screen.
2. Press the ~ key until the
I
Sel Factory
I
message displays at the bottom of the
screen.
3. Press Enter.
4. Press the t key until 3 displays.
5. Press Enter to load the predefined factory configuration 3.
6. Press the t key until
I
U4
I
displays at the top of the screen.
7. Press the ~ key until '9600bps
V32
I
displays. Press Enter to validate.
8. Press the t key until
i
U7
i
displays.
9. Press the
~
key until
I
Xon/Xoff Passed
I
displays. Press Enter to validate.
10. Press the t key until
I
U8
I
displays.
11. Press the
~
key until
I
Xon / Xoff
I
displays. Press Enter to validate.
12. Press the t keyuntil ' U10
1
displays.
13. Press the ~ key until
I
Forced on
I
displays. Press Enter to validate.
14. Press the tkey until
I
U12
I
displays.
15. Press the
~
key until
Follow CD
displays. Press Enter twice to select this
option.
16. Press ~ until
I
Mode
I
displays.,
17. Press
~
until the message
I
V25HDLC NRZIASC
I
displays.
18. Press Enter twice.
The modem is now in V.25 bis synchronous mode. See "Saving the Modem
Configuration" on page 12-7 below.
Setting the 7858 Modem Connected to COM1 (ASYN)
1. Power OFF the modem
2. Press and hold the t key while power ON the modem.
3. The modem is set to Factory'O rn AT command' mode.
See "Saving the Modem Configuration" on page 12-7 below.
Setting the 7858 Modem Connected to MPACard on COM2 (ASYN)
1. Power OFF the modem
2. Press and hold the t key while power ON the modem.
3. The modem is set to Factory 0 in AT.command mode.
See "Saving the Modem Configuration" on page 12-7 below.
12-6
All 3745 Models & the 3746-900: eSG
,/