IBM 3745 Console Setup Manual page 70

o
o
o
o
o
Step 11. Select Modem/Line characteristics and click Change.
Step 12. Select Asynchronous, IS03309 as the framing standard and click OK.
Step 13. SeleCt the Called party number (in CM/2, this is SP123456) and click
Change. '
Step 14. Enter the phone-number of the service processor modem and click OK,
then OK again on the subsequent screen.
I
~hone
number <..1 .. 2 .... 3 ... 4 .... 5 .... 6 ... 7 .... 8 ............................................... .
~
L/!/////=u:r~/,/E;~;~~~iE///~;~~;~2"//,,,/,//,//,r/.'wh~'7////.W/M////.~7//u//.~
Step 15. Select SNA local node characteristics and click Configure and
Continue.
Chapter 6. Modem-Attached Remote Workstation Configuration
6-17