IBM 3745 Console Setup Manual page 147

Comm Mode= HALF BLOCK
Break= 500MS
Recv <CR>=<CR><LF>
Alt Input DATA=ON
Local= OFF
Line Control=PRTS
Recv <Del>=IGNORE
Turnaround Char=DC3
Null Suppress=OFF
Di~connect=2
SEC
Send Ack=OFF
Send Null=ON
Closing the Console Configuration
1. Press Ctrl and the minus key on the number keypad.
a. Type
Y
to save the configuration
b. Type N to cancel the new configuration or keep the previous one
c. Type
C
to review the configuration.
3161 or 3163 (Remote)
IBM PC
1. Hold down the Ctrl key (bottom left) and press the Setup key (top right).
2. Fill in the fields as follows (use the
t
and
~
to move between items, and the
spacebar to select parameter values):
Machine Mode
Operating Mode
Interface
Line Control
Line Speed (bps)
Parity
Turnaround Character
Stop Bit
Word Length (bits)
Response Delay
Break Signal (ms)
3. Press Send.
4. Press Select.
IBM3HH
BLOCK
RS232C
PRTS
1200
EVEN
DC3
2
7 (3161 only)
100 (3161 only)
500(3161 only)
5. Use the spacebar to fill in the fields as follows:
Scroll=OFF Return=CR Line Wrap=ON
Autoff=ON Send=PAGE Null Supp=ON
6. Press Select to return.
7. Go to ''Testing the Modem Connection to a Remote Console" on page 11-13
and check the connection to the 3745.
1. Start a 3101 emulation session.
2. Type
3
to create a specification file. Fill in the fields as follows:
Line Speed
Block Mode
Parity
Stop Bits
Automatic Line Feed
Carriage Return
Null Suppress
Character at End
Scroll i ng
1200
Y (yes)
E (even)
2
Y (yes)
Y
(CR/LF)
ON
4
(XOFF)
N (no)
11-6
All 37 45 Models
&
the 3746-900:
eSG
./