Card Layout For The Serveraid-Mr10Is Controller; Serveraid-Mr10Is Controller - Connectors - IBM ServeRAID-MR10is User Manual

3-2
Figure 3.1

Card Layout for the ServeRAID-MR10is Controller

Table 3.1 ServeRAID-MR10is Controller – Connectors
Connector Description
J1 Board-to-board
connector for
battery backup unit
daughter card
J2 Universal
Asynchronous
Receiver/
Transmitter
debugging
J3 Individual Activity
LED header for
eight SAS ports
J4 Individual Fault LED
header for eight
SAS ports
J5 Debug connector
J6 Board Default
Debug
ServeRAID-MR10is SAS/SATA Controller Characteristics
Type Comments
20-pin Provides an interface to the
connector daughter card that contains the
battery backup unit.
4-pin Reserved for IBM
connector
16-pin Provides an LED interface
connector individually to eight SAS ports. The
LED indicates activity on individual
drives.
16-pin Provides an LED interface
connector individually to eight SAS ports. The
LED indicates errors on individual
drives.
2-pin Reserved for IBM use.
connector
2-pin Reserved for IBM use.
connector
®
use.