Decommissioning And Disassembling; Further Safety Regulations - BÖWE P25 Installation Instructions Manual

2 Safety Regulations

2.5 Decommissioning and Disassembling

Only skilled workers with suitable protection devices and work tools are authorized to
decommission and disassemble the system.
When decommissioning and disassembling the machine, drain all solvent from the machine,
including the pipelines, valves and fittings. You must remove residues that could cause
environmental pollution.
You must separate electric lines and pipelines that were used to supply or drain the machine from
the supply network. Make sure that they cannot be turned on by unauthorized persons.
Have an authorized customer service technician dispose of the cooling agent from the refrigeration
unit.

2.6 Further Safety Regulations

This BÖWE drycleaning machine works with TETRACHLORETHENE (perc). This solvent is
hazardous to the health and is rated as slightly toxic in the context of the Hazardous Substances
Ordinance.
Drinking, eating and food storage are prohibited in the area where the machine is installed.
Open flames and fires are not allowed in the operating area. No smoking is allowed.
Install steam generators in such a way that they do not draw in air that contains solvent.
A BÖWE customer service representative must train the personnel in the operation of the machine
before the first startup. This training must include information on safe operation and possible
hazards.
The owner is responsible for employing trained personnel to load and unload the machine and must
employ well-informed and expert personnel for maintenance work. No unauthorized personnel are
allowed in the area of the machine.
The daily checks prescribed in the operating instructions represent the minimum requirements.
Operating personnel must immediately report any changes in the machine that could affect the
safety.
5
2
2.5
2.6
P25/P30