Start/Stop; Mode Button; Numbered Buttons - Abilica XC 2700 MILL V4 User Manual

1.5.1. Start/Stop

"START"
Push button to start running belt. Speed is set to 1.0.
"STOP"
Push button to stop running belt.
1.5.2 Program
Push button repeatedly to choose desired workout program. Choose between manual mode, pre-set
programs P0 to P9, user progrms U1 to U3, three countdown modes, or the fat burn program. Standard
speed is set at 1.0 kph, and max speed is 30.0 kph. Incline starts at 0, and max incline is level 15.

1.5.3 Mode button

Push button to choose countdown modes: H1 counts down time; H2 counts down distance; H3 counts down
calories. Push SPEED +/- to adjust data. Push START to start running.
1.5.4 Speed +/-
Push button to adjust speed at an increment of 0.5 kph. Hold button for more than two seconds to adjust
speed quicker.
1.5.5 Incline +/-
Push button to adjust incline at an increment of 1 level. Hold button for more than two seconds to adjust
incline quicker.

1.5.6 Numbered buttons

The numbered buttons can be used as quick buttons for both speed and incline. Push a number between 0
and 9 followed by either SPEED or INCLINE, to adjust the desired level.
1.5.7 Clear
When pressing the wrong button, press CLEAR to delete the data.
1.5.8 Manual
Push MANUAL to open HRC mode. You can choose HRC1, HRC2 or HRC3.
22