Commercial Mode Overview; Setup Checklist; Pass-Through Mode - LG Pro:Centric 24LT572M Setup Manual

Commercial Mode Overview

This document describes how to set up LT572M Pro:Centric
LG commercial TV functionality is based on "ownership" of the Channel Map; that is, the Channel Map
resides in the TV's CPU, Protocol Translation Controller (PTC), or embedded b-LAN™ (EBL) module, or
it resides in a Pro:Centric application or an external device from the solution provider.
These TV models support several different operational modes: LG's Free-To-Guest (FTG) Mode via the
TV CPU, FTG Mode via the TV's EBL module, or Pass-through Mode (default). When in Pass-through
Mode, these TV models can also be externally controlled via Multiple Protocol Interface (MPI) or—for
32/43LT572M TVs only—TV-Link Tuner (TLT) interface (RS-232C).

Setup Checklist

Note: This document provides information specific to Commercial Mode operation. Refer to the Owner's
Manual for information on TV installation and hardware and cable connections.
Installation
__ Unpack TV and all accessories.
__ Install batteries in the Installer Remote.
__ Install TV on VESA mount or stand.
Note: It may be advisable to make all cable
connections before installing on VESA mount
or stand, as appropriate.
Hardware Connections
__ Install any additional hardware as
appropriate to your institution, LAN, etc.

Pass-through Mode

This mode allows you to configure individual TVs for Pro:Centric and/or FTG Mode via CPU operation
or create a Master TV Setup for cloning purposes. This mode also allows external control via either the
GAME CONTROL/MPI port or—for 32/43LT572M TVs only—the TLT (RS-232C) port on the TV rear jack
panel.
There are three methods for configuring individual TVs that are currently in Pass-through Mode: using
one of the two LG First Use Wizard options or using the Custom Master TV Setup procedure.
LG First Use Wizard Configuration
When the TV is in a factory default state, the LG First Use Wizard provides the following two configuration
options. See "First Use Wizard" on pages 12 to 13 for further information.
• The EZ-Manager Wizard provides automated or manual options for configuring Pro:Centric operation
and also provides the option to configure the TV using a USB memory device.
• The Express Script provides streamlined configuration of the TV for FTG Mode via CPU operation with
Hospital Mode features (including pillow speaker setup) and also provides the option to configure the TV
for Pro:Centric operation.
Custom Master TV Setup
Unlike the guided process above, the Custom Master TV Setup procedure enables you to create a
customized Master TV Setup for cloning purposes for TVs that are to remain in Pass-through Mode. Use
the Installer Remote to configure Installer Menu items as required for TV operation and set up TV features
(Channels, Picture, Sound, etc.). See "Custom Master TV Setup" on pages 47 to 49 for detailed information.
6
®
TVs for Commercial Mode operation.
Cable Connections
__ Make all rear jack panel connections, as
appropriate.
Commercial Mode Setup
__ Complete appropriate procedures as described
in this document for Commercial Mode operation.
206-4342