LG Pro:Centric 24LT572M Setup Manual page 20

EZ-Manager Wizard (Cont.)
(Continued from previous page)
• Ensure the USB device to be used has been formatted with FAT format.
• When creating files to be downloaded, avoid using special characters (?, &, @, etc.) in filenames.
• Refer to "Ez Download Utility" on pages 31 to 34 for further information on the Ez Download
utility.
• Refer to "Custom Master TV Setup" on pages 47 to 49 for information on creating a Clone (.tlx)
file, and/or refer to "Creating an FTG Configuration File" on pages 56 to 58 for information on
creating an FTG Configuration (.tlx) file for FTG Mode via CPU configuration.
• See Reference section, "Downloading a Boot Logo Image using a USB Memory Device," for
boot logo image guidelines.
• See Reference section, "Updating TV/PTC Software using a USB Memory Device," for further
information on software updates.
USB Configuration via EZ-Manager Wizard
With either the TV Configuration Options or the Zone, Label, and Room Number screen on display,
proceed as follows to configure the TV using the USB memory device.
1. Insert the USB memory device with the appropriate file(s) into the TV's USB port.
2. Use the arrow keys on the Installer Remote to select USB Configuration, and then press OK.
You will be redirected to the TV Manager / USB download options.
Note: You can press
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
TV MANAGER
USB
Diagnostics
Back
3. Select the appropriate option from the TV Manager, and initiate the desired download(s).
20
on the Installer Remote at any time to return to the EZ-Manager Wizard.
Ez Download
Download Boot Logo
Update TV Software
Update PTC Software
Import Clone File
OK
(Continued on next page)
206-4342