LG Pro:Centric 24LT572M Setup Manual page 38

Installer Menu (Cont.)
Installer Menu Items 042 through 116
Item Function
042 AUTO INPUTS
046 STRT AUX SRCE
047 AUX STATUS
053 DIS. CH-TIME
069 EN. CH-T COL.
070 FOR. CH-TIME
071 BCK. CH-TIME
073 CH NOT AVBLE
075 REVERT CH
077 QUICK SHUTOFF
078 UPN MSB
079 UPN MSB-1
080 UPN MSB-2
081 UPN LSB
082 CHKSM ERROR
083 HANDSHK TIME
084 PERMANENT BLK
088 EN NOISE MUTE
090 KEY LOCK
091 HDMI2 ENABLE
094 SAP MENU EN
096 DEF. ASP. RATIO
097 AUDIO OUTPUT
098 PRO:CENTRIC
099 BACK LIGHTING
102 ATSC BAND
103 ATSC TUNE MODE
104 START MINOR CH
106 ASP RATIO LOCK
107 BANNER SELECT
116 VIDEO MUTE EN
* Values 201, 202 applicable for 32/43LT572M TVs only.
38
Value Range Default Value
0 – 255 0
1, 3, 5, 255 255
0 / 1 0
0 / 1 0
0 / 1 1
0 – 7 2
0 – 7 2
0 / 1 0
0 / 1 0
0 – 17 0
0 – 255 255
0 – 255 255
0 – 255 255
0 – 255 255
0 / 1 1
0 – 5 5
0 / 1 0
0 / 1 1
0 / 1 0
0 – 2 1
0 / 1 1
0 – 4 2
0 – 9 7
0 / 2 0
1 – 202, 255 * 255
0 – 4 4
0 / 1 1
0 – 255 0
0 / 1 0
0 / 1 1
0 / 1 0
Brief Description of Function
Determines the Aux inputs for which auto-sensing is enabled. See detailed
Sets the starting Aux source (if item 004 STRT CHANNEL is set to 0).
Controls the MPI status channel response for Aux sources. Set to 1 for Aux
source to be reported as its channel number.
Set to 1 to disable the TV's native Channel-Time display.
Set to 1 to enable custom color for MPI display characters.
Chooses custom foreground color for MPI display characters.
Chooses custom background color for MPI display characters.
If set to 1 and item 028 CH. OVERIDE is set to 0, a "CHANNEL NOT
AVAILABLE" message is displayed if the user attempts to direct tune a channel
that is not included in the channel lineup.
If set to 1 and loss of MPI communication occurs, the TV tunes to the
Allows the TV to be turned OFF with press and hold of pillow speaker
channel buttons. Set to 0 to disable. Set from 1 to 17 to define hold time.
See detailed descriptions.
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
Enforces rigid MPI checksum.
Determines the MPI timing requirement of an MPI command to follow an MPI
Set to 1 to remove the blocking hours setting in the Function Menu for Parental
Control and make the block permanent.
(Analog channels only) If set to 1, audio is muted if no signal is present.
If set to 1, all display panel button functions are locked. IR is still functional.
Set to 0 to disable HDMI 2. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 2.
Set to 1 to enable the SAP feature in the Function Menu.
Selects the default aspect ratio. See detailed descriptions.
Set as required in accordance with external audio equipment connected to the
TV. See detailed descriptions.
Set to 0 to disable the Pro:Centric application. Set to 2 for GEM (Java) Mode.
Sets the level of the TV picture back lighting. See detailed descriptions.
Selects the RF band used by the ATSC tuner. See detailed descriptions.
Set to 1 for Physical Channel tuning. Set to 0 for Virtual Channel tuning.
Selects the Minor Start Channel number. Set to 0 for analog (NTSC) channel.
Set to 0 to use the default aspect ratio each time the TV is turned ON. Set to 1
to retain the aspect ratio set before the TV was turned OFF.
Selects the type of banner to display during channel change.
(Analog channels only) If set to 1, video mutes (blank screen) when no
descriptions.
Start Channel.
Status Response.
signal is present.
206-4342