LG Pro:Centric 24LT572M Setup Manual page 25

(Continued from previous page)
Note: After the TV setup is complete (see step 8), the only way to add or remove Aux inputs
to/from the FTG Channel Map, is to edit the FTG Channel Map using the Cloud Configuration
Tool. See the Cloud Configuration Tool / Channel Map web page overview on page 60, and/or
refer to the Cloud Configuration Tool User Guide for further information.
Note: Disabled Aux inputs are not included in the channel lineup. However, if you wish to
enable a disabled Aux input in the future, you may do so by changing the applicable Installer
Menu settings (see Installer Menu information in this document). See also note above.
3. Select the speaker configuration.
In this screen you will be able to select the speaker configuration for the TV. This selection sets
Installer Menu item 027 HOSPITAL MODE, which also means that when the Express Script is
complete, the TV will be operating in FTG Mode via CPU with Hospital Mode features enabled.
See item 027 description on page 41 for further information.
Use the Up/Down arrow keys on the Installer Remote to select the speaker configuration field,
and then use the Left/Right arrow keys to select the appropriate speaker: Pillow Only (default),
TV Only, or Pillow & TV. When you have made your selection, use the arrow keys to select
Next, and then press OK.
Express Script
Step 3. Speaker Selection
Which speaker configuration would you like to use?
Pillow Only
Back
PTC: V#.##.### CPU: V##.##.##.## ASIC: D279
4. Select the pillow speaker code/voltage.
If using a Pro:Centric pillow speaker (LG IR codes) or a pillow speaker with Zenith IR codes,
you can simply select Next and press OK on the Installer Remote to accept the Zenith pillow
speaker code default. Otherwise, use the Up/Down arrow keys on the Installer Remote to select
the pillow speaker code field, and use the Left/Right arrow keys to select the appropriate option.
When you have made your selection, use the arrow keys to select Next, and then press OK.
Express Script
Step 4. Pillow Speaker
Which brand pillow speaker code/voltage will
you be using?
Zenith (+12v)
Back
PTC: V#.##.### CPU: V##.##.##.## ASIC: D279
206-4342
3
1 ► 2 ► ► 4 ► 5 ► 6 ► 7 ► 8
Next
OK Exit
CC
4
1 ► 2 ► 3 ► ► 5 ► 6 ► 7 ► 8
Next
OK Exit
CC
Express Script (Cont.)
(Continued on next page)
25