LG Pro:Centric 24LT572M Setup Manual page 33

(Continued from previous page)
Note: Press on the Installer Remote, as necessary, to exit the Ez Download utility and/or
the TV Manager. If you accessed the TV Manager via the EZ-Manager Wizard, you will be
returned to the last screen on display before you selected the "USB Configuration" option. If
you accessed the TV Manager via the TV menus, you will be returned to program viewing.
TV MANAGER
USB
EZ Download
[TLX] ChMap_IM.tlx
[LOGO] Splash_Image.jpg
[EPK] CPU_SW.epk
Back
7. To select or de-select a file, respectively, use the Up/Down arrow keys on the Installer Remote to
highlight the filename, and press OK to add or remove the checkmark at the left of the filename.
Note: The utility will only allow you to select one of each file type for downloading. For example,
if there are two TLX files in the Ez Download list, you can only select one or the other of those
two files.
Note: After the Ez Download utility is run, a file is automatically created and stored on the USB
device that was used. The file, which will have a ".dzm" extension, maintains a history of the
file(s) previously used with the Ez Download utility. The next time(s) you use this USB device
with the Ez Download utility, the file(s) selected for the last download will be pre-selected for the
current download, thus facilitating the process of configuring additional TVs of this model using
the same USB device.
8. The fields at the right of the screen will change depending on the currently highlighted file.
Select the appropriate option(s) for each file, as applicable.
• For software and boot logo image files: The fields at the right of the screen show the TV
software versions and any available Forced Update options. Do not select any Forced Update
options unless you have been specifically instructed to do so or have previous experience with
Expert Software Updates.
• For Clone/Configuration (.tlx) files: If the selected Clone/Configuration (.tlx) file includes an
FTG Channel Map, a Channel Tuning / Channel Banner Display field at the right of the screen
enables you to choose the format for the channel tuning/banner display. Press the green
button on the Installer Remote to select Logical tuning, or press the yellow
Installer Remote to select Physical tuning.
206-4342
Apply
Channel Tuning /
Channel Banner Display
Logical
Physical
OK
Ez Download Utility (Cont.)
button on the
(Continued on next page)
33