LG Pro:Centric 24LT572M Setup Manual page 21

(Continued from previous page)
Update progress will be displayed on the screen. Do NOT remove the USB device while
updates are in progress. When the update process is finished, depending on the type of update(s)
completed, either the EZ-Manager TV Configuration Options screen will be redisplayed (software
and/or boot logo image updates only—see also note below) or the TV will tune according to the
Start Channel setting in the Installer Menu (TV configured with Clone/Configuration file).
Note: If you are performing a software and/or boot logo image update, the TV will reboot after
the update(s) is/are complete. When the TV Configuration Options screen is redisplayed, you
can either proceed with configuration via the EZ-Manager Wizard or exit the EZ-Manager Wizard,
as required.
4. Remove the USB memory device, and verify that the appropriate configuration/download(s)/
update(s) is/are resident on the TV.
206-4342
EZ-Manager Wizard (Cont.)
21