LG Pro:Centric 24LT572M Setup Manual page 27

(Continued from previous page)
Select Edit Channel Lineup and press OK on the Installer Remote to edit the channel lineup.
Channel edit options will be displayed in a pop-up window (see example at right). Use the Up/
Down arrow keys to navigate between fields.
Note: The total number of channels found ("Searched") during Auto Tuning is indicated at the
top of the pop-up window.
• Input & CH: Edit the channel lineup, as necessary. Use the Left/Right arrow
keys on the Installer Remote to select channels (including Aux inputs), and
press OK to delete (or re-add) channels per the installation site requirements.
Note: When a channel is active in the channel lineup (i.e., added), all
additional fields in this screen are selectable/available. If a channel is deleted,
all other fields in this screen become inaccessible (grayed out).
• Icon: This field enables you to select the appropriate trademark/icon for each
channel's Channel-Time on-screen display. If known, you can direct enter
the icon number using the number keys on the Installer Remote. Otherwise,
use the Left/Right arrow keys on the Installer Remote to select the desired
logo. Icons are available for familiar channels, such as ABC, CBS, NBC, etc.
Identifiable icons should enable the end user to readily know what common
networks are available.
• Label: Press OK to display the pop-up virtual alphanumeric keypad, and
add a custom text label for each channel/Aux input (up to 17 characters),
as desired. Added custom labels will be displayed above the Label/Keypad
field for each channel, as applicable.
• Bank: All channels found during Auto Tuning, as well as all enabled Aux
inputs, automatically are added to and active in all four channel banks. Use
the arrow keys to define channel banks, as desired. See also "Channel
Banks Overview" on the following page for further information.
When you are finished, press MENU to close the pop-up window. Use the arrow keys to select
Next, and then press OK.
7. Select the channel tuning/channel banner display format.
If logical channel tuning (default) is appropriate for the installation site, you can simply select
Next and press OK. Otherwise, use the Up/Down arrow keys on the Installer Remote to select
the channel tuning/channer banner field, and then use the Left/Right arrow keys on the Installer
Remote to select "Physical" for the channel tuning/channel banner display format. When you
have made your selection, use the arrow keys to select Next, and then press OK.
Express Script
Step 7. Channel Tuning/Channel Banner Display
Which channel tuning/channel banner display
format would you like to use?
Logical
Back
PTC: V#.##.### CPU: V##.##.##.## ASIC: D279
206-4342
7
1 ► 2 ► 3 ► 4 ► 5 ► 6 ► ► 8
Next
OK Exit
CC
Express Script (Cont.)
Searched CH: 135 / Enabled Aux: 3 / Added CH: 128 / Added Aux: 3
* You can add up to 600 channels (Aux added as analog).
• Input & CH
• Icon
You can also use numeric keys to direct enter Icon
• Label
• Bank
1
2
3
4
Add/Delete
(Continued on next page)
DIGITAL 2-1
►
No Logo
number (0–212)
Keypad
NORMAL
ADDED
ADDED
ADDED
ADDED
Move MENU Exit
27