Table of Contents
Advertisement
(3) Check the "Specify a location" check box only, then click Next > .
Check that "Specify a location"
only is checked.
(4) Enter "C:\Program Files\NECTools32\bin\PG-FPL3\DRIVER\FTDI" in the address bar, then click OK .
Enter "C:\Program Files\NECTools32\bin\PG-FPL3\DRIVER\FTDI".
Remark
If the installation destination folder is changed for GUI software installation, enter "new-
folder\bin\PG-FPL3\DRIVER\FTDI".
CHAPTER 3 SOFTWARE INSTALLATION
Figure 3-17. Driver File Location (Windows 2000)
Figure 3-18. Address Specification (Windows 2000)
User's Manual U17454EJ1V0UM
27
Advertisement
Table of Contents
