Toolbar; Menus; File] Menu - NEC PG-FPL3 User Manual

This window consists of the following items.
Menu bar (displayed at the top)
Toolbar (displayed under the menu bar)
Action log window (displayed under the toolbar)
Programmer parameter window
(displayed to the right of the action log window)
Status bar
4.3

Toolbar

The toolbar contains buttons to start the most important procedures of the FPL3.
4.4

Menus

Depending on the actual device status or device type, some menu items may be enabled or disabled.
4.4.1

[File] menu

After clicking the [File] menu, the following pull-down menu is displayed.
Commands related to file operation appear here.
CHAPTER 4 OPERATION USING GUI SOFTWARE
Name
Table 4-1. Toolbar Buttons
[Device] – [Setup...] button
[File] – [Load...] button
[Device] – [Blank check] button
[Device] – [Erase] button
[Device] – [Program] button
[Device] – [Verify] button
[Device] – [Autoprocedure (EPV)] button
User's Manual U17454EJ1V0UM
Description of Display
Displays menu items executable by the FPL3.
Displays frequently used commands as icons.
Displays an FPL3 action log.
Displays programming parameter settings.
Displays status.
41