Table of Contents
Advertisement
<3> Click PRM File Read to open the parameter file selection window.
In this case, select the parameter file for the
<4> Set the items in the Operation Mode field so that the FPL3 is adjusted to the user programming
environment.
Here, assume that the settings shown below are set.
Figure 5-4. Device Setup Window – Standard Tab <After Setting>
Remark
The selectable port can be checked with the Device Manager. For details, refer to 3.3
Confirmation of USB Driver Installation.
58
CHAPTER 5 USAGE EXAMPLE
µ
PD78F0533, then click Open .
Figure 5-3. Parameter File Selection
User's Manual U17454EJ1V0UM
Advertisement
Table of Contents
