Table of Contents
Advertisement
3.1
GUI Software Installation
The GUI software allows easy and comfortable access to all features of the FPL3 flash programmer.
The installation program is contained in the CD-ROM (IECUBE Accessory Disk) included with the IECUBE
package.
Execute the following steps to install the GUI software.
(1) When using Windows XP, log on as the computer administrator. When using Windows 2000, log on as the
Administrator.
(2) Insert the CD-ROM (IECUBE Accessory Disk) included with the IECUBE package into the CD-ROM drive.
(3) Double-click "My Computer", "CD-ROM", "PG-FPL3", and "SETUP" in that order. Double-click "setup.exe" in the
SETUP folder.
(4) Select a language to be used for installation ("English" in this example), then click OK .
(5) After selecting the language, the window shown below is displayed.
Click Next > to continue installation.
18
CHAPTER 3 SOFTWARE INSTALLATION
Figure 3-1. Setup Language Selection
Figure 3-2. Installation Start
User's Manual U17454EJ1V0UM
Select language
Advertisement
Table of Contents
