Table of Contents
Advertisement
(4) Connecting and starting the system
<1> Set the MODE switch to "MODE3".
<2> Connect the FPL3 with the host machine via the USB cable.
<3> Check that the Power LED is turned on.
<4> Check that the power to the target system is not turned on, then connect the FPL3 with the target system
via the target cable.
<5> Start the GUI software.
(5) Setting the programming environment
<1> Select [Device] → [Setup] from the menu bar.
<2> The Standard tab of the Device Setup window for device setup is activated.
CHAPTER 5 USAGE EXAMPLE
Figure 5-1. GUI Software Main Window
Figure 5-2. Device Setup Window – Standard Tab
User's Manual U17454EJ1V0UM
57
Advertisement
Table of Contents
