(3) Check that "Search for the best driver in these locations." is selected. Check the "Include this location in the
search:" check box and enter "C:\Program Files\NECTools32\bin\PG-FPL3\DRIVER\FTDI" in the address bar,
then click Next > .
<2> Check "Include
this location in
the search:" only.
<3> Enter "C:\Program Files\NECTools32\bin\PG-FPL3\DRIVER\FTDI".
Remark
If the installation destination folder is changed for GUI software installation, enter "new-
folder\bin\PG-FPL3\DRIVER\FTDI".
(4) When installation of the USB driver is complete, the screen shown below appears. Click Finish to complete
installation.
Figure 3-30. USB Driver Installation Completion (Windows XP)
CHAPTER 3 SOFTWARE INSTALLATION
Figure 3-29. Search Method (Windows XP)
User's Manual U17454EJ1V0UM
<1> Check that "Search for the best driver
in these locations." is selected.
33