Bosch MegaPixel IP Camera NWC-0800 User Manual page 24

22 en | Software
down list is marked with a red cross.
Selects screen layout for viewing live video from multiple cam-
eras (from left to right):
Depending on the chosen screen layout and the actual number
of installed cameras, the unused sections of the layout will be
empty blue screens.
number; to take the snapshot from all cameras, highlight "cam-
eras" at the root (top) of the drop-down camera list. The snap-
shot file names contain the camera number, date, and time of
the snapshot. To locate/view the snapshots in the snapshot
folder, right-click anywhere on screen, then select "photo,"
F.01U.064.422 | V 1.0 | 2007.03
Turns on/off a drop-down list of the installed cameras.
Individual cameras are disabled/enabled by left double-
clicking on the camera number. When disabled, a live
video image from the disabled camera is replaced with
a blue rectangle, and the camera number in the drop-
Displays the Settings menu (see Settings section
below).
Enables a full screen display without the toolbar and
menus. Return to window display by clicking the dedi-
cated icon in the pop-up window or by the Esc button.
– single camera layout; 2x2 camera layout; 3x3 camera
layout; 4x4 camera layout;
– 10-camera layout with 2 large and 4x2 smaller images;
– 8-camera layout with 1 large, 3x1 and 1x4 smaller
images;
– 13-camera layout with 1 large, 2x2 and 4x2 smaller
images.
Displays the archive controls (not operative in this
software version). These are explained in
Section 4.2.6 Archive.
Takes a snapshot of live video. The snapshot is taken
from the camera which is highlighted in the drop-
down list of the installed cameras (see above). To
highlight another camera, left-click on the camera
User Manual
MegaPixel IP Cameras
Bosch Security Systems