Bosch MegaPixel IP Camera NWC-0800 User Manual page 32

30 en | Software
Fig. 4.7 Motion Settings menu showing motion detection settings
Motion detection settings apply only to the camera number dis-
played in the Camera field on the left of the Motion Settings
menu: use the drop-down list to change the camera number.
The settings are:
–
Note: Select to Detected by Camera when Motion Triggered
Recording on DiBos8 is used.
–
F.01U.064.422 | V 1.0 | 2007.03
'Detected by' provides two selected options, the software
motion detection and the in-camera motion detection.
'Sensitivity' is a group of controls to adjust motion detec-
tion computation:
– "Level" adjusts the inter-frame brightness change
threshold that triggers motion detection. Lower set-
tings may cause false motion detection due to noise.
– "Detail" adjusts the size of the detectable objects
within each motion detection zone. Lower settings
may cause false motion detection due to noise.
User Manual
MegaPixel IP Cameras
Bosch Security Systems