Advertisement
Gripping Workpiece with Clamp Dogs
The clamp dogs can be positioned on the tables
to grip workpieces too wide to fit between the
jaws.
To grip workpiece with clamp dogs:
1.
Place workpiece on workbench, leaving
enough room between tables to allow for
tightening.
2.
Insert clamp dogs in holes nearest work-
piece, allowing room for each one to pivot
toward face of workpiece.
3.
Rotate hand screws clockwise to tighten jaws
and secure workpiece (see Figure 3).
Clamp Dogs
Figure 3. Workpiece gripped using clamp dogs.
NOTICE
Never exceed the listed capacity of the
workbench. Doing so could break it.
-2-
Engaging Suction Cup Feet
The mini workbench features suction cup feet that
are designed to grip smooth, flat surfaces and
secure the workbench.
To engage suction cup feet:
1.
Ensure suction cups are clean, then place
workbench on smooth, flat surface.
2.
With foot levers in upright position, press
down firmly on workbench to compress suc-
tion cups.
3.
Push each foot lever down to secure work-
bench (see Figure 4).
Foot Lever
Suction Cup
Figure 4. Foot lever in compressed position.
4.
If suction cups do not grip surface, return foot
levers to upright position, press down more
firmly on workbench, and repeat Step 3.
DO NOT use the Model T25251 as a step-
ladder. Doing so could cause serious
personal injury and break the workbench.
T25251 Mini Workbench (Mfd. 01/13)
Advertisement
