5-3.Winding The Bobbin Thread - HIGHLEAD HLK-3020 Instruction Manual Parts Catalog

★ Please refer to the figure on the right and thread
the upper thread as the figure shows.

5-3.Winding the bobbin thread

★Please be sure to pull the upper thread out of the needle before winding the bobbin thread.
(1) Turn the power switch ON．
(2) Entering winding model with refering to the Instruction manual of control systerm.
(3) Lead thread through thread stand④ and thread guard as shown on the below figure and then wind
the thread to the empty bobbin⑤in the arrow mark "a" direction couple times and insert the bobbin
⑤into the bobbin winder⑥．
(4) Push the winder lever⑦in the
arrow mark "b" direction．
(5) Step on the gray color start
foot switch⑧, the sewing
machine runs and start the
winding.
(6) When the bobbin thread is
full，the winder lever⑥ will
return to the original position
automaticly and the winding
will stop．
(7) Step on the gray foot switch
to stop the sewing machine.
— —
9