(1) Mount the power switch①with the wood
screw②underneath the table as shown on
the figure.
(2) Fix the electric cords with the staples③
underneath the table.
(3) Connect the plug⑧of the power switch①
to the control box⑦.
(4) Attach the power plug⑤to another end of
the power switch cord④.
3-3.Connection of the foot switch
Connect the foot switch⑥to the relevant socket (the middle socket) on control box⑦.The foot switch is
enclosed in the accessory box.
3-4.Installation of the sewing machine head
Caution
★ For the safety,lift and move the sewing machine heads with powerful lifting equipment under monitor of
more than two people.
(1) Install the stand and put tabletop① on it.
(2) Take out the support blocks③from accessory box and place them on the transoms of stand.
(3) Put the sewing machine head⑧
into the cut-out of machine head
and make sure the four feet of
machine heads are seating on
the support blocks.
(4) Set machine head onto stand
with Allen screws⑤, and
washers from accessory box as
following figure shows.
(5) Adjust the Allen screws② to
raise the table top up onto the
bottom of big slide plate⑨of
machine head. Connect the
tabletop and stand with bolts⑦.
(6) Install oil pan ③ on the
transoms of stand with screws
④.
—
—
5