Esu SwitchPilot User Manual page 28

17. List of all supported CVs
CV Name
1 Decoder address 1, LSB
3 Configuration output 1
(only SwitchPilot!)
4 Configuration output 2
(only SwitchPilot!)
5 Configuration output 3
(only SwitchPilot!)
6 Configuration output 4
(only SwitchPilot!)
7 Version number
8 Manufacturer's ID
9 Decoder address 1, MSB
28
Description
Lower 6 bits (bit 0 - 5) of the first decoder address for the outputs 1 to 4.
Is used in conjunction with CV 9 in order to store the address.
Describes the properties of decoder output 1.
Function Description
Variable k83-compatible: output is active as long
as the button at the control panel is pressed.
Pulse mode PECO pulse mode for PECO-turnout drives. Reduces
the sensitivity of the overload protection.
Pulse mode Duration of „On"-status: multiple of 65 msec.
Alternating Out A and Out B are alternately active.
blinker Duration of „On"-status: multiple of 130 msec
Bi-stable k84-compatable: either Out A or Out B
is active, variable
Describes the properties of decoder output 2
Function Description
- as CV 3 -
Describes the properties of decoder output 3.
Function Description
- as CV 3 -
Describes the properties of decoder output 4.
Function Description
- as CV 3 -
Internal software version of the decoder
Manufacturer's ID by ESU
Writing value 8 results in a full factory reset of all CVs.
higher 3 bits (bit 6 - 8) of the first decoder address for the outputs 1 to 4.
used together with CV 1 to store the address.
Range Value
1 - 63 1
0 - 64 8
Value
0
1
2 - 31
32 - 63
64
0 - 64 8
Value
0 - 64 8
Value
0 - 64 8
Value
- -
- 151
0- 7 0