Cisco 6800 Series User Manual page 11

Calls
Before you begin
Activate or Deactivate Monitoring of the BLF List
Procedure
Step 1
Press the line key that monitors the user to park an active call.
Step 2 To unpark a call, do one of three things:
• Press the monitored user that displays the parked call.
• Press the extension line key, then press the monitored user that displays the parked call.
• Use the navigation button to focus on the extension line key, then press the monitored user that displays
Call Park Extension and Status
Your administrator can configure call park to support parking calls against dedicated call park extensions.
These extensions are used only for call park and are not used for call routing.
Figure 1: Call Park in Call Park Extensions
In the above example, the phone is monitoring Park Location1. Your administrator has configured a call park
extension, Park Location1. If call park extensions are subscribed successfully, line keys will be assigned for
call park function and get the monitored extension status.
The following table shows the call park status and the relevant icon displayed next to the call park extension:
Table 1: Call Park Status and Icons
Status
Idle
Parked
the parked call.
Call Park Extension and Status
Icon
Calls
11