Declaration Of Conformity And The Ce Mark - AOpen CRW1232 PRO Manual

CE TEST REPORT

19. Declaration of Conformity and the CE Mark

There are three possible procedures pertaining to the declaration of conformity :
19.1 Conformity Testing and Declaration of Conformity by the Manufacturer or His
Authorized Representative Established within the Community or by an Importer.
- Article 10 (1) of the EMC Directive,
- § 3 (1) no. 2a of the EMC Act.
19.2 Declaration of Conformity Issued by the Manufacturer or His Authorized
Representative Established within the Community or by an Importer Following
Testing of the Product and Issued of an EC certificate of conformity by a
competent body.
- Article 10 (2) of the EMC Directive,
- § 3 (1) no. 2b of the EMC Act.
19.3 Declaration of Conformity Issued by the Manufacturer or His Authorized
Representative Established within the Community or by an Importer Following
Testing and Certification of the Product by a Notified Body.
- Article 10 (5) of the EMC Directive,
- § 3 (1) no. 2b of the EMC Act (radio transmitting installations).
19.4 Specimen For The CE Marking Of Electrical / Electronical Equipment
The components of the CE marking shall have substantially the same vertical dimension, which may not be
less than 5 mm.
SPORTON International Inc.
TEL : 886-2-2696-2468
FAX : 886-2-2696-2255
Report No. : C121401
Page Number : 62 of 62
Issued Date : Feb. 21, 2001