Handles - Husqvarna 322HD60 Workshop Manual

7.10 Handles

7.10.1 To remove and install the front handle
1. Remove the 2 screws (A), the 2 washers (B), the 2
vibration elements (C), and the front handle (D).
D
B
C
E
F
2. Remove the 2 sleeves (E) and the 2 vibration
damping units (F).
3. Remove the 2 screws (G) and the bracket (H).
4. Install in the opposite sequence.
7.10.2 To remove and install the throttle handle
1. Remove the carburetor. Refer to
install the carburetor on page 23 .
2. Disconnect the short circuit cables.
1369 - 001 - 13.02.2020
A
G
H
To remove and
3. Remove the 2 screws (A) and the 4 washers (B).
E
4. Remove the 4 dampers (C), the 2 bushings (D), and
the throttle handle (E).
5. Examine all parts for damage. Replace damaged
parts.
6. Install in the opposite sequence.
A
B
C
D
C
B
Repair instructions - 27