Page 2
GET TO KNOW THE MC56F81000-EVK Power/USB Power/USB Power/ Power/ Virtual Serial Virtual Serial OpenSDA USB Port Port Reset Reset Adapter/ Adapter/ 5 V Only 5 V Only JTAG Port for JTAG Port for MC56F81768 MC56F81768 JTAG Port JTAG Port for K26...
Page 3
QUICK START GUIDE MC56F81000-EVK OPERATION NOTES 1. MC56F81000-EVK can be powered by either of the USB connectors (J12, J26) or the adapter input (J7). Beware that only an adapter with 5 V output can be used. 2. When the board is powered up, a green LED D2 will illuminate, indicating 3.3 V is on.
Page 4
GET STARTED Download installation software and documentation under “Jump Start Your Design” at www.nxp.com/MC56F81000-EVK. SUPPORT Visit www.nxp.com/support for a list of phone numbers within your region. WARRANTY Visit www.nxp.com/warranty for complete warranty information. www.nxp.com/MC56F81000-EVK NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners.
Need help?
Do you have a question about the MC56F81000 and is the answer not in the manual?
Questions and answers