Remove & Close The Lens Cover; Placing Your Projector - RCA RPJ135 Instruction Manual

Remove & Close The Lens Cover
Remove the lens cover before using
LENS COVER

Placing Your Projector

Your projector can be installed in four different configurations (see picture below):
Front Table:
Select this location with the projector placed near
the floor in front of the screen. This is the most
common way to position the projector for quick
setup and portability.
Front Ceiling:
Select this location with the projector suspended
upside-down from the ceiling in front of the screen.
NOTE: A projector mount is required to install the
projector in a ceiling.
Rear Table:
Select this location with the projector placed near
the floor behind the screen.
NOTE: That a special rear projection screen is
required.
Rear Ceiling:
Select this location with the projector suspended
upside-down from the ceiling behind the screen.
NOTE: A projector mount is required to install the
projector in a ceiling. A special rear projection
screen is required.
Close the lens cover when unit not using
REMOVE
5
CLOSE
LENS COVER
FRONT TABLE
FRONT CEILING
REAR TABLE
REAR CEILING