RCA RPJ135 Instruction Manual page 15

Connect Audio Output
Follow below picture to connect audio cable and device.
1. Press the button twice to turn off power of your projector before connection.
2. Use audio cable to connect follow below figure.
3. After connecting and turn on both units. Your projector sound from external device
now.
4. After using , turn off both unit
AV CABLE
Important Note:
If there is no sound from the stereo audio output when playing media contents from a set
top box, BD/DVD or streaming players connecting to the HDMI input, please check the set
top box or the player's digital audio settings and make sure it is set to "PCM Stereo" mode.
Install USB Device
Follow below picture to install USB
Turn the unit off before install USB.
( Aux Out / Line Out )
USB 2
HDMI 2
14
USB 2
HDMI 2