Remove & Close The Lens Cover; Placing Of Your Projector; To Reduce Image Distortion - RCA RPJ065 Instruction Manual

Remove & Close The Lens Cover
Remove the lens cover before using
REMOVE
LENS COVER
VOL
OK
PAIR
VOL

Placing of Your Projector

Your projector can be installed in four different configurations (see picture below):
Front Table
Rear Table

To Reduce Image Distortion

• Move the projector as close to the center
of the screen as possible.
• The light beam from the projector should
be perpendicular to the screen for a
rectangular or square image.
POWER
Front Table:
Select this location with the projector placed near the floor
in front of the screen. This is the most common way to
position the projector for quick setup and portability.
Rear Table:
Select this location with the projector placed near the floor
behind the screen.
NOTE: That a special rear projection screen is required.
5
Close the lens cover when unit not using
CLOSE
LENS COVER
VOL
OK
PAIR
VOL
POWER