Using Projector Menu 1.0 - RCA RPJ135 Instruction Manual

Using Projector Menu 1.0

In Projector Home Screen, use
to enter. Or press SETUP button to enter.
Picture Mode Standard
Color Temper...
Aspect
Noise Reduction
MPEG_ Noise ... >
Panel Flip Rotate 1
Projector Zoom
USE
TO SELECT
Picture Mode Standard
PRESS OK
USE
TO SELECT
Color Temper...
PRESS OK
USE TO SELECT
Aspect 16:9
PRESS OK
USE TO SELECT
Noise Reduction
PRESS OK
USE
TO SELECT
MPEG Noise
PRESS OK
USE
TO SELECT
Panel Flip Rotate 1
PRESS OK
USE
TO SELECT
Projector Zoom
PRESS OK
Picture Mode
Customer define
Contrast
Brightness
Color
Sharpness
Color temperature
Customer define
Red
Green
Blue
Aspect Ratio
4:3
16:9
This Picture menu showed on right upper of view screen.
Use to select different picture effect to Standard / Soft /
User / Vivid. Use
Color / Sharpness digit If chose User item. Follow below figure.
Use to select different color temperature to Cool / Medium /
Warm / User. Use
If chose User item. Follow below figure.
Use buttons to select screen ratio AUTO / 4:3 / 16:9.
Follow below figure.
Use buttons to select Off / Low / Middle / High / Default.
Use buttons to select Off / Low / Middle / High / Default.
Use to select rotate 0 / rotate 1 / rotate 2 / rotate 3 to set
screen angle.
Use to select different zoom scale digit 70% -100%.
Parameter
0-100
0-100
0-100
0-100
Parameter
0-100
0-100
0-100
The signal in a 4:3 aspect ratio projection image
The signal in a 16:9 aspect ratio projection image
button to select SETUP icon and press
or to select Contrast / Brightness /
or to select Red / Green / Blue digit
16
button
OK