Remove & Close The Lens Cover; Placing Your Projector - RCA RPJ240-COMBO-VOUCHER Instruction Manual

Remove & Close The Lens Cover
Remove the lens cover before using
LENS COVER

Placing Your Projector

Your projector can be installed in four different configurations ( see picture
below):
Front Table:
Select this location with the projector placed
near the floor in front of the screen. This is the
most common way to position the projector
for quick setup and portability.
Front Ceiling:
Select this location with the projector
suspended upside-down from the ceiling in
front of the screen.
NOTE: A projector mount is required to install
the projector in a ceiling.
Rear Table:
Select this location with the projector placed
near the floor behind the screen.
NOTE: That a special rear projection screen
is required.
Rear Ceiling:
Select this location with the projector
suspended upside-down from the ceiling
behind the screen.
NOTE:
A projector mount is required to install the
projector in a ceiling.
A special rear projection screen is required.
REMOVE
5
Close the lens cover when unit not using
CLOSE
LENS COVER
FRONT TABLE
FRONT CEILING
REAR TABLE
REAR CEILING