Advertisement
Selection of operating
mode
Menu level 1
Menu level 2
Params & Display
SystemConfig
Menu level 1
Menu level 2
Params & Display
LoadController
Menu level 1
Menu level 2
Params & Display
LoadController
Menu level 1
Menu level 2
Params & Display
LoadController
8.1.5 Configuration of the load controller
«Operating modes with the load controller»
Example: Internal load controller with Pt1000 sensor.
Menu level 3
LC_OptgMode
Or, alternatively:
Menu level 3
Configuration
After the internal load controller has been activated, the sensor input must be selected
and configured.
Menu level 3
Configuration
Then, the temperature measuring range must be defined.
Menu level 3
Configuration
Menu level 4
Menu level 5
ExtLC X5-03
Int LC
Int LC Bus
Int LC X62
Ext LC X62
Ext LC Bus
Menu level 4
Menu level 5
LC_OptgMode
ExtLC X5-03
Int LC
Int LC Bus
Int LC X62
Ext LC X62
Ext LC Bus
Menu level 4
Menu level 5
SensorSelection
Pt100
Pt1000
Ni1000
TempSensor
PressSensor
Pt100Pt1000
Pt100Ni1000
NoSensor
Menu level 4
Menu level 5
MeasureRange PtNi
150°C/302°F
400°C/752°F
47
Menu level 6
Menu level 6
Menu level 6
Menu level 6
5921
Advertisement
