5. Curve settings via manual control
The system continues the startup sequence and assumes normal operation. The first
curvepoint entered are the ignition positions and the load entered is the number of de-
grees (angular rotation) of the fuel actuator.
90°
Pos.
AIR
FUEL
AUX
0°
0 %
7550d07e/0704
Change of load / position resulting from an automatically entered point
Choose «Man» from the menu «Params & Display»
Gas / Oil»
«Curve Param». It is now possible to follow the above curves by changing
the load. A point can be saved at every intermediate point. Then, the load / position
graph will look as follows:
90°
Pos.
0°
0 %
7550d08e/0704
Change of load / position with two points
100 %
Load
«Ratio Control»
100 %
Load
23
«Settings
AIR
FUEL
AUX
5921