Advertisement
8. Setting the load
controller (option)
Menu level 1
Menu level 2
Params & Display
LoadController
9. Selecting a
temperature or pressure
sensor
Menu level 1
Menu level 2
Params & Display
LoadController
Menu level 3
Configuration
Select a load controller operating mode in accordance with the examples given in chap-
ter «Operating modes with load controller».
This configures the output signal for the VSD
(section 6.3)
If the internal load controller of the LMV5... is used, a temperature or pressure sensor
must be connected to input 1, 2 or 4.
Menu level 3
Configuration
On the configuration level of the load controller, select the required type of sensor.
Then, define the sensor's measuring range.
This configures speed acquisition (subsection 17.1.3)
Menu level 4
Menu level 5
LC_OptgMode
Menu level 4
Menu level 5
SensorSelection
MeasureRange
PtNi
Ext Input X61 U/I
MeasureRange
TempSensor
MeasureRange
PressSens
Ext Setpoint minExt
Setpoint max
35
Menu level 6
Menu level 6
5921
Advertisement
