Advertisement
1. Parameterizing the
burner identification
(burner ID)
Menu level 1
Updating
2. Selecting the fuel
trains
Menu level 1
Params & Display
3. Checking the inputs / outputs while taking into account the burner and plant conditions. For details, refer
to chapter Digital inputs.
Menu level 1
Parameter
5921
8
Commissioning instructions for the
LMV5... system
8.1 Practice-oriented setting instructions for the
system configuration, the burner control, and
the electronic fuel / air ratio control system
These settings instructions serve for commissioning the LMV5... system.
To access the parameter setting levels, a password must be entered.
After having entered the correct password, the data will appear on the AZL5... (backup
for emergencies). Then, the unit can be parameterized.
After leaving the parameter setting level, we recommend to make a backup.
8.1.1 Basic configuration
Menu level 2
Menu level 3
BurnerID
Burner identification: E.g. OEM13-10-02-003 (name of OEM = burner manufacturer;
Menu level 2
Menu level 3
BurnerControl
Configuration
FuelTrainGas from DirectIgniG to Pilot Gp2
FuelTrainOil from LightOilLO to HO w Gasp
Menu level 2
Menu level 3
BurnerControl
Configuration
Menu level 4
Menu level 5
date 13-10-2002, production number 003); minimum 4 charac-
ters
Menu level 4
Menu level 5
ConfigGeneral
FuelTrainGas
FuelTrainOil
Menu level 4
Menu level 5
ConfigInput/Output
32
Menu level 6
Menu level 6
Menu level 6
Advertisement
