Function Buttons - Arctic King MWDUL-10CRN1-BCJ4 Operator's Manual

Remote Control Operating Instructions
NOTE:

Function buttons

ON/OFF Button
Operation starts when this button
is pressed and stops when the
button is pressed again.
NOTE: If the unit has THE ENERGY
SAVER function, it will initiate
automatically the under COOL,
DRY, and AUTO (AUTO COOL
and AUTO FAN) modes.
TEMP DOWN Button
Push this button to
decrease the indoor
temperature setting in
1ºC/1ºF increments up to
17ºC/62ºF.
TIMER Button
Push this button to activate
the "AUTO-START" or "AUTO
STOP" program.
ONE TOUCH Button
Push this button and the system
will automatically shift to COOL
operation with the auto fan speed,
The set temperature is 26ºC/80ºF
and the timer setting program
will be cancelled.
MODE Button
Press this button to select the
desired operation mode from
AUTO, COOL, DRY, HEAT
(cooling & heating models
only), and FAN.
NOTE:
mode if the machine you
purchased is the cooling only type.
The heat mode is not supported by
the cooling only appliance.
TEMP UP Button
Push this button to increase
the temperature setting
in 1
30
º
FAN Button
Push this button to select the fan speed
in four steps: AUTO, LOW,
MED and HIGH.
SLEEP button
Press this button to activate
the SLEEP mode. This function
is available under the COOL, HEAT,
or AUTO mode only and
maintains the most comfortable
temperature for you.
ENERGY SAVER Button
Press this button to activate
the energy-saving mode.
Press it again to stop the
funtion (on some models).
22
Do not select the HEAT
C/1 F increments up to
º º
C/86 F.
º