Function Buttons - Arctic King KAP08R1AWT Owner's Manual & Installation Manual

Function Buttons

Before you begin using your new air conditioner, make sure to familiarize yourself with
its remote control. The following is a brief introduction to the remote control itself. For
instructions on how to operate your air conditioner, refer to the Operating Instructions
section of this manual.
ON/OFF
Turns the unit on or off.
MODE
Scrolls through operation modes
as follows:
AUTO COOL DRY HEAT
NOTE:
Please do not select HEAT mode
if the machine you purchased is
cool-only type. Heat mode is not
supported by the cool-only models.
FAN SPEED
Selects fan speeds in the
following order:
AUTO LOW MED
SLEEP
Saves energy during
sleeping hours.
Optional
Page 24
FAN
O N /O F F
MODE
HIGH
T E MP
FAN
SLEEP
SHORT CUT
Sets and activates your favorite pre-settings.
TEMP
Increases temperature in 1°C (1°F) increments.
Max. temperature is 30°C (86°F).
TEMP
Decreases temperature in 1°C (1°F) increments.
Min. temperature is 17°C (62°F).
NOTE: Pressing and hold
together for 3 seconds will alternate the
temperature display between the °C & °F scale.
SHORT
CUT
TIMER ON
TIMER
ON
Sets timer to turn unit on (see How to Use
Basic Functions for instructions)
TIMER
OFF
TIMER OFF
Sets timer to turn unit off (see How to Use
Basic Functions for instructions)
FOLLOW
LED
ME
LED
Turns indoor unit's LED display on and off.
If you are sensitive to light while sleeping,
you can press the LED button to turn off the
LED display on the unit. Press the button
again to turn it back on.
FOLLOW ME
Temperature sensing and room
temperature display button.
and buttons