Festo CPV DI01 Series User Instructions page 20

5 Addressing
The CPV Direct must be addressed differently according to
the field bus protocol. In general the following applies:
1. A CPV valve terminal always occupies 16 output
addresses.
A CP valve location occupies two addresses:
2. CP valve terminals, electric input or output modules on
the extension string each occupy 16 input or output
addresses.
Details and examples of addressing the CP system can be
found in the manual P.BE−CP−DI01−.. .
20
lower−value address = pilot solenoid 14
higher−value address = pilot solenoid 12.
Festo CPV..GE−DI01−8 0503b English