05/10 Version 5.05-00
Ports and connections
For instructions on how to use the network connections, see topic section "Ad-
vanced Applications", chapter
[9] The rear side of the AP 5.4/5.6 with I/O board (option) installed.
A Start/stop signal input
B Signal port (option)
USER MANUAL
AP5.4 – AP5.6
CAUTION!
Using poor quality auxiliary equipment can damage the printer.
Only connect the printer to devices that fulfil the SELV (safety extra-low
voltage) circuit requirements in accordance with EN 60950.
Only connect original accessories.
Connections for a foot switch (signal starts printer) or stacker (signal stops
printer)
4 inputs / 3 outputs on optionally available I/O board
Commissioning and Operation
Data Transmission with Ethernet
A
B
C
D
E
F
G
I
H
J
10
on page 18.