Hardware Overview - Ubiquiti LTU-LR Quick Start Manual

Outdoor, shielded Category 6 (or above) cabling and shielded RJ45 connectors are
required for all wired Ethernet connections.
Hardware Overview
LAN LED
The LED will light steady blue when an active Ethernet connection is made to the
Ethernet port and flash when there is activity.
Power LED
The LED will light blue when the device is connected to a power source.
Reset Button
To reset to factory defaults, press and hold the Reset button for more than 10
seconds while the device is powered on.
PoE In [24V] Port
This 10/100/1000 Ethernet port is used to connect the power and should be